Start Wiring your Thermostat by Pulling Power from Terminals 2 and 5 Wiring the WSM-63 and ETO2 together is a great way to be able to control the WSM-63 timer panel with a pavement sensor. Pull the power from Terminals 2 and 5 and input into the L and N on the ETO2 controller. […]
Picture
The thermostat should be installed inside a square 4”x4” back box with a single mud ring mounted horizontally (also called plaster ring).
Wiring your Tempo thermostat is simple and straightforward.
The proper distance to space the mats should be 5 feet on center or 3ft between mats. Please refer to the installation manual for more details regarding your snowmelt installation.
The megger is used as a quality control measure to test the insulation resistance to detect any fault in the heater cable jacket. Such leaks cannot be spotted with a regular ohmmeter and help spot any damage to the cable and cable jacket.
There is no battery backup or capacitor in the 4iE, however, there is internal memory. Periodically the programming and date/time are stamped to a section of internal memory. This is then overwritten when the next stamp takes place. When the power is resumed following a power outage, the device will revert to the most recent stamp taken.
Yes, the sensor lead can be extended up to 200 meters using same gauge cable. Total resistance of the sensor cable must not exceed 10 ohms.
If using a DCM-PRO membrane, scrape/scratch and prime the vinyl to ensure bonding with a highly modified thinset and install the membrane directly to it.
The CDP-2 blinks when it is getting minimal power through the DS controller to power it.
In this guide, we will cover various aspects of the installation process, focusing on key recommendations and requirements that will help you make informed decisions and execute the installation with confidence. We will address topics such as conduit usage, local electrical code compliance, routing of cables, and essential considerations to ensure a safe and effective installation.
![Thumbnail [200x250]](/wp-content/uploads/Indoor-Systems-Page-Image.png)
![Thumbnail [200x250]](/wp-content/uploads/image-13.png)
![Thumbnail [200x250]](/wp-content/uploads/Projects-Image.png)